Fried Instant Noodle Making Machine Installation and Commissioning/Noodle Making Equipment

• Customization: Available
• Transport Package: Container
• Specification: 70m*7m*4.5m
• Model NO.: 350-765
• Trademark: dongfang
• Origin: Zhengzhou
• HS Code: 84381000
• Production Capacity: 160000PCS/8h

Product Description

Fried instant noodle production line installation and commissioning
1.Preparation before production line installation
       According to the layout requirement,the workshop floor should be poured with cement concrete, and the down pipe and electric wire pipe should be embedded at the same time. The ground should be flat without unevenness, it should be terrazzo ground normally. Draw a ink line parallel to the wall from the center line of the equipment at the position where the equipment is to be installed as the installation benchmark. In order to facilitate maintenance, the outline of the equipment should not be less than 1m from the wall.


2. Installation
According to the requirements of the equipment layout process drawing, each single machine should be placed in place, with the space between each single machine reserved, and the center line of each single machine should coincide with the ink line on the ground. Each single machine shall be in good contact with the ground. If it is in poor contact with the ground due to the ground inequality, it shall be padded with pad iron.
3.Commissioning
Turn on the power supply and run each single machine in idle mode
Put water into the oil pan, with steam pressure of 0.6MPa
Carry out load test after idle operation test. First, 200kg flour can be used for machinetesting. During the test, the equipment should operate normally and the quality of the noodle cakeshould meet the relevant standards.
Purchase the instant noodle production line of our company.
Our company is responsible for the above work, installation, commissioning equipment and training of operators.


Parameter

model number	capacity	Power	Steam consumption	Workshop for single layer steamer dimension(m)	Workshop for 3 layer steamer dimension(m)	Workers
BFP-200	40000/8H	45KW	1200-1300KG/H	70*5*4	50*5*4	4
BFP-300	60000/8H	56 KW	1200-1400KG/H	75*5*4	60*5*4	4
BFP-400	110000/8H	83 KW	1800-2000KG/H	100*6*4	75*6*4	4
BFP-500	140000/8H	90 KW	1800-2100KG/H	100*6*4	75*6*4	4
BFP-600	160000/8H	106 KW	2000-2200KG/H	100*7*4.5	80*7*4.5	5
BFP-700	200000/8H	114 KW	2400-2600KG/H	110*8*4.5	80*8*4.5	5
BFP-800	230000/8H	125 KW	2600-2800KG/H	110*8*4.5	90*8*4.5	5
workers:( not including packaging workers )

Details

Finished products

Our company and more products
       
1. we have been engaged in manufacturing  Instant noodles making machine for 46 years, accumulating rich experience and enjoying high reputation.
2.  Long term cooperation with more than 100 customers in more than 50       countries. Provide free technical support and layout solutions for more than 1000 potential customers.
3.  we are manufacturer, Fast delivery and good service .All the machines are strictly inspected before making shipment. We can also provide customized equipment according to the noodle products you provide
4. We have ISO9001 and CE certificate,And more than 50 patent certificates
5. Installation and commision: we will send 2 technician to buyer's factory and Train employees how to operate.Warranty is for one year
6. Different production line can make fried/non- fried instant noodle, cup noodles, indomie noodles, maggi cup noodles, koka instant noodles, instant ramen, nissin ramen spicy seafood, nissin ramen spicy seafood,chow mein noodles, korean cup noodles etc.



Cooperative enterprise


More products


FAQ:

1.  Q: Are you manufacturers?
     A: We are manufacturer of noodle machine with 40 years experiences, and more than 40 engineers, who can design the machine according to your special request.
2.  Q: What is your noodle machine for?
     A: Our noodle machine can produce many kinds of noodles, such as stick noodles, fresh noodles, instant noodles, fried instant noodles, non fried instant noodles, chowmein noodles, noodle leaves, extruding noodles, etc.
3.  Q: How many countries have you exported to?
     A: we have exported to more than 40 countries, such as Canada, Turkey, Malaysia, Nigeria, Bangladesh, Indonesia, India, etc.
4.  Q: What is your delivery time?
     A: 40-50days. For special request, we can deliver the machine within 30 days.
5.  Q: What about aftersales service?
     A: We have 30 after-sales service staff with overseas service experience, will to assemble the machine and train the customer's workers when machine arrives.



After sales service commitment

In order to provide better service for customers, to make customers feel more at easy after cooperation with our company.
Our company promise as follows:
1. Three guarantees should be implemented within one year from the date of completion and commissioning of the equipment.
During the warranty period, the company is responsible for repair and replacement of spare parts free of charge in case of failure due to internal quality problems of the equipment (excluding human factors).
2.  After the equipment is delivered for use, the supplier should be provided with free technical guidance and training by electrical personnel and mechanical operators in the demander, including can learn after teaching and accommodation.
3.  When the demander's equipment is in normal continuous production, the supplier shall send technicians to make a return visit by telephone or email once every six months, and assist the demander in equipment maintenance if there is any problem.
4.  After the warranty period. The price of the equipment parts required by the demander (refer to the self-made parts of the supplier) can be reduced by 10% for timely supply. 
5.  The above services shall be provided until the demander stops using the equipment.
During the use of the equipment, if the supplier has new technical projects launched, it can give priority to the technical transformation of the equipment for the demander, and only charge the cost.